PeakStop
PEAKSTOP IS A PROTECTION DEVICE USEFUL AGAINST DAMAGES OF ELECTRONIC EQUIPMENTS DUE TO OVERVOLTAGES (EITHER OF COMMON AND DIFFERENTIAL MODE).
EACH CONVERTOR HAS A BUILT IN FILTER AGAINST SPIKES.
PEAKSTOP INCREASES THE LEVEL OF PROTECTION FILTERING THE HIGH ENERGY PULSES.
IT MUST BE INSTALLED IN PARALLEL TO EACH GROUP OF UNITS, AT THE MAIN SUPPLY SIDE. NO SPECIFIC DISTANCE IS RECOMMENDED.
ONE PEAKSTOP IS ENOUGH TO PROTECT ALL THE CONVERTORS CONNECTED TO ITS LINE.
ITS USE IS SUGGESTED FOR EVERY APPLICATION WITH ELECTRONIC CONVERTORS, ESPECIALLY FOR OUTDOOR INSTALLATIONS AND WHERE INDUCTIVE LOADS ARE PRESENT (I.E. MAGNETIC TRANSFORMERS).
ACCESSORIES
