• INDOOR AND OUTDOOR DISPAYS
• INDOOR DISPLAYS
• QUEUING SYSTEMS
• PHARMACY CROSSES
• SOLART DISPLAY
• RENEWABLE ENERGY DISPLAYS

• Products
• » Led Technologies
• » INDOOR AND OUTDOOR DISPAYS
• » Countdown and count up counters

Countdown and count up counters

B-Led countdown and count up counters are luminous displays with 4 digits (88:88) that count time expressed in hour: minutes and minutes: seconds.
In the countdown version you need to set the starting time, the display will then show the count-down until zero. The count up follows the same proceedings, counting forward.

Time counters automatically count time expressed in days, hours, minutes or seconds, or forward or back. The unit must be specified at the order. Available with 2, 3 or 4 digits with different digits heights (HC).
Models with digits heights between 12 and 30 can be single or double face, with different colours, high efficiency elliptic LEDs. HC 6 model is only available in the single face version with 4 digits, made up of 7 segments red LED modules.

FEATURES
• Available digits heights: 6, 12, 17, 23, 30 cm.
• 4 digits in the count down and up models; 2,3 or 4 digits in the time counter model.
• Models with HC between 12 and 30 cm have high efficiency elliptic red LEDs (110°/50°), model with HC 6 cm is made up of 7 segments red LED modules.
• Countdown functions: starting time setting, start, stop, reset. The display shows the countdown from the set time until zero.
• Count up functions: arrival time setting, start, stop, reset. The display shows the count starting from zero until the set time.
• 18 months stand-by memory.
• Operation temperature range: from -15°C to +40°C.
• Open/close input for the programming.
• Treated and painted black metallic box for indoor and outdoor use (HC6 model is available with glazed aluminium box).
• Protection class IP 43.
• Fixing brackets.
• Poured methacrylate anti-glare screen.
• Forced ventilation LEDs cooling system (for HC 17 and bigger models).
• Power supply: 230V +/-10%.

OPTIONAL
• Radio control for the programming, as alternative to the open/close input.
• Push-button panel with 2 buttons, as alternative to the open/close input.
• “Save Energy” system to lower the LEDs brightness during the dark hours.
• Different LEDs colours.